Best Tree Felling Wedges: 5 Spiked Picks Compared (2026)
Five tree felling wedges compared by wedge length, spike pattern, ABS plastic or reinforced nylon, pack count and stated timber handling.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best OverallNEO-TEC 6-Pack Wedges9.7/10View on Amazon - 2
Best Multi-Size SetUNCO 6-Piece Wedge Set9.6/10View on Amazon - 3
Best Dual-Sided GripCold Creek Loggers 4-Pack9.6/10View on Amazon - 4
Best 5.5-Inch PackAR-PRO 5.5-Inch 6-Pack9.6/10View on Amazon - 5
Best Single WedgeOregon 5.5-Inch Wedge9.5/10View on Amazon
When autumn leaves drop and crisp weather signals the start of firewood cutting season, heading into the woodlot means dropping standing timber before the deep winter snow arrives. Getting trees on the ground cleanly and safely requires keeping the saw bar free from pinching and nudging the trunk toward your planned lay. Finding the best tree felling wedges gives woodcutters the leverage needed to prevent back-lean and guide stems safely to the ground. This comparison reviews five spiked ABS and reinforced composite logging wedge sets across the details that matter in the woods: wedge length, gripping teeth, materials, and pack counts.
FirewoodGearHQ may earn a small commission if you buy through links on this page. The price you pay stays the same. Affiliate disclosure.
Quick picks
- Best Overall NEO-TEC 6-Pack Wedges: Reinforced PA6 nylon with 30% glass fiber, high-visibility orange finish, and two wedge sizes. Check price on Amazon
- Best Multi-Size Set UNCO 6-Piece Wedge Set: Six impact-resistant ABS wedges spanning 5.5-inch, 8-inch, and 10-inch sizes with a storage bag. Check price on Amazon
- Best Dual-Sided Grip Cold Creek Loggers 4-Pack: Smooth on one face and serrated on the other, molded from high-impact ABS in the USA. Check price on Amazon
- Best 5.5-Inch Pack AR-PRO 5.5-Inch 6-Pack: Six compact 5.5-inch spiked ABS wedges with a mesh storage bag for small to medium timber. Check price on Amazon
- Best Single Wedge Oregon 5.5-Inch Wedge: A lightweight 3.2-ounce 5.5-inch wedge with stabilizing serrations from an established forestry brand. Check price on Amazon
The picks
NEO-TEC 6 Pack Tree Felling Wedges
A 6-pack of 5.5-inch and 8-inch felling wedges molded from glass-fiber-reinforced PA6 nylon in flame orange with raised barbs.
Pros
- PA6 nylon reinforced with 30% glass fiber resists mallet strikes
- Includes both 5.5-inch and 8-inch wedge sizes
- Flame orange color is easy to spot in woods and wood shavings
- Raised barbs help keep the wedge seated in the back cut
Cons
- No warranty term is stated
- Listing does not specify the exact count of each wedge size in the 6-pack
- Bullets refer to them as log splitting wedges rather than felling wedges
- No storage bag included in the package
UNCO- Tree Felling Wedges with Spikes, 6 pcs
A 6-piece logging set of high-impact ABS felling wedges in 5.5-inch, 8-inch, and 10-inch lengths with sharp spikes and a breathable mesh carry bag.
Pros
- Three lengths included: 5.5-inch, 8-inch, and 10-inch
- Sharp anti-slip spikes grip wood fibers to prevent kickback
- Breathable mesh storage bag included for organization
- Impact-resistant ABS plastic withstands heavy mallet driving
Cons
- No warranty term is stated
- Spec table lists product dimensions incorrectly as 1 x 1 x 1 inches
- Title includes splitting wedge phrasing despite being plastic felling wedges
- Heaviest set in the roundup at 2.94 pounds total
Felling Wedges, Tree Felling Wedges for Tree
A 4-pack of high-impact ABS felling wedges featuring two 5.5-inch and two 8-inch wedges with smooth tops and serrated undersides, made in the USA.
Pros
- Molded in the USA from rugged high-impact ABS plastic
- Dual-sided profile: smooth on one side and serrated on the other
- Supplies two 5.5-inch and two 8-inch wedges in one pack
- Listing states material will not rot, shrink, or swell
Cons
- No warranty term is stated
- Spec table gives dimensions as 5.5 x 2 x 1 inches, ignoring the 8-inch pair
- Four-wedge pack offers fewer wedges than 6-pack competitors
- No storage pouch included
AR-PRO 6 Pack Tree Felling Wedges with Spikes
A 6-pack of 5.5-inch ABS felling wedges with raised triangular spikes and a mesh storage bag, sized for small to medium timber.
Pros
- Six 5.5-inch wedges provide plenty of duplicates for the woods
- Raised triangular spikes bite into wood to hold position
- Listing states ABS plastic will not damage chainsaws upon accidental contact
- Mesh storage bag keeps wedges together between cutting sessions
Cons
- No warranty term is stated
- Only includes 5.5-inch wedges, with no 8-inch or 10-inch options
- Bullets refer to felling dogs and log splitting wedges
- Item weight listed as 1.23 pounds
Oregon Felling Wedge, 5.5 Inch Lightweight
A single 5.5-inch forestry wedge weighing 3.2 ounces, molded from durable plastic with stabilizing serrations for small to medium trees.
Pros
- Reputable brand in professional forestry and chainsaw equipment
- Lightweight at 3.2 ounces for carrying in a pocket or belt
- Stabilizing serrations on the primary face prevent backing out
- Compact 5.5-inch length ideal for small stems and bucking cuts
Cons
- No warranty term is stated
- Sold as a single wedge rather than a multi-pack
- Specific plastic polymer formulation is not stated
- Contradiction between bullet dimensions (2 x 3 x 5.5 in) and spec table (2.65 x 6.4 x 1 in)
Compare the picks
| Model | Woodlot Score | Length | Material | Pack Size | Spike Style | Weight |
|---|---|---|---|---|---|---|
| NEO-TEC 6-Pack Wedges | 9.7/10 | 5.5 in and 8 in | PA6 + 30% GF | 6 pack | Raised barbs | 1 lb |
| UNCO 6-Piece Wedge Set | 9.6/10 | 5.5 in, 8 in, 10 in | ABS plastic | 6 pcs | Anti-slip spikes | 2.94 lb |
| Cold Creek Loggers 4-Pack | 9.6/10 | 5.5 in and 8 in | High-impact ABS | 4 pack | Serrated barbs (one side) | 1.48 lb |
| AR-PRO 5.5-Inch 6-Pack | 9.6/10 | 5.5 in | ABS plastic | 6 pack | Raised spikes | 1.23 lb |
| Oregon 5.5-Inch Wedge | 9.5/10 | 5.5 in | Quality plastic | 1 pack | Stabilizing serrations | 3.2 oz |
Specifications are manufacturer rated, collected 12 October 2026. None of these listings states a concrete warranty period, and none states an applicable third-party safety certification, so all five score zero for safety and warranty.
How we scored them
Each wedge set is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page.
| Product | Woodlot Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| NEO-TEC 6-Pack Wedges | 9.7 | 30 | 22 | 22 | n/a | 0 |
| UNCO 6-Piece Wedge Set | 9.6 | 30 | 20 | 22 | n/a | 0 |
| Cold Creek Loggers 4-Pack | 9.6 | 29 | 21 | 20 | n/a | 0 |
| AR-PRO 5.5-Inch 6-Pack | 9.6 | 27 | 20 | 21 | n/a | 0 |
| Oregon 5.5-Inch Wedge | 9.5 | 27 | 19 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
Buying guide: choosing the best tree felling wedges
Wedge length and timber size
A felling wedge acts as a simple mechanical incline that lifts the back cut of a tree, preventing the trunk from settling backward onto the guide bar. Choosing the right length depends on tree diameter. Compact 5.5-inch wedges suit small to medium stems and fit neatly in a pocket or cruiser belt. Longer 8-inch and 10-inch wedges offer greater taper height and surface contact for thicker trunks, providing additional lift before the wedge bottoms out in the kerf. Sets that combine multiple sizes allow cutters to adapt to different stem diameters across a woodlot.
Plastic wedges versus metal wedges
Felling wedges used around chainsaws must always be made of plastic, such as high-impact ABS or glass-fiber-reinforced nylon. If a spinning saw chain brushes against a plastic wedge in the kerf, the plastic yields without dulling the chain cutters or kicking the bar back violently. In contrast, heavy steel splitting wedges are strictly for splitting firewood on the block. Striking a metal wedge with a chainsaw running nearby risks severe bar damage and metal-on-metal tooth failure. Keep metal wedges at the woodpile and plastic wedges in the felling kit.
Grip barbs and stacking profiles
When a tree shifts or vibrates under saw throttle, a smooth wedge can spit out of the cut. Wedges in this roundup incorporate raised triangular spikes, serrations, or molded barbs to grip the wood grain inside the stump. Some designs feature stabilizing barbs on one face while keeping the opposite face smooth. This configuration helps when stacking wedges: driving one wedge over another allows woodcutters to double the effective lift in a stubborn back cut without the two wedges catching against each other.
Pack sizes and woodlot organization
Tree felling requires carrying multiple wedges into the woods. A single wedge can get trapped in a kerf if a tree sits back unexpectedly, leaving the cutter needing a second or third wedge to relieve the pressure and free the guide bar. Multi-packs supplying four to six wedges ensure you have adequate backups on hand. Sets that include a mesh storage bag make it convenient to keep wedges organized in a vehicle or equipment tote while allowing wood shavings and dirt to sift out.
Wear eye protection and gloves for cutting, splitting and handling, follow every tool's manual, install stoves to code, and have the chimney inspected and cleaned every year. See EPA Burn Wise and NFPA heating safety. Read our Safety Disclaimer.
Around the Woodpile
- Store wedges in a mesh storage bag so trapped moisture and wood chips dry out rather than clinging to the plastic between cutting sessions.
- Choose high-visibility colors such as flame orange or bright yellow so wedges remain visible when set down in leaf litter, deep brush, or sawdust.
- Inspect wedge striking heads for mushrooming or cracking after heavy mallet blows, and clean wood sap from the gripping barbs.
- Never substitute a plastic felling wedge for a steel firewood splitting wedge when splitting rounds on the block.
Frequently Asked Questions
How to use tree felling wedges safely?
Felling wedges are placed into the chainsaw back cut behind the guide bar to prevent the kerf from closing and pinching the chain. Because felling standing timber carries significant hazards, operators should consult official resources like the OSHA logging eTool or hire certified professional arborists rather than attempting hazardous cuts without training. Personal protective equipment is essential whenever running a saw: always wear chainsaw chaps, a forestry helmet with face screen and hearing protection, heavy cut-resistant gloves, and protective boots. Maintain an acute awareness of kickback risk, ensure an escape path is clear, and never cut alone in the woods.
What size tree felling wedge to use?
The appropriate wedge size corresponds to the diameter of the trunk. For small to medium trees, compact 5.5-inch wedges provide sufficient lift while remaining easy to slip into a pocket or tool pouch. For larger timber, 8-inch and 10-inch wedges deliver higher lift and greater surface area to support heavier trunk weight. Multi-size sets containing 5.5-inch, 8-inch, and 10-inch wedges allow you to match the wedge to the stem size.
How many felling wedges do I need?
Cutters should carry multiple wedges to every tree. Having at least two or more wedges allows you to place them side by side in a back cut to distribute lifting force evenly, or stack one wedge over another if additional lift is required. Carrying extra wedges also ensures you have a backup if the guide bar gets pinched or if a wedge is driven deep into the kerf.
Can I use metal wedges for felling trees?
No. Felling wedges must be made of plastic, such as ABS or reinforced nylon. If a moving chainsaw chain contacts a metal wedge in the kerf, it will instantly ruin the cutter teeth, damage the guide bar, and create a severe kickback hazard. Metal wedges are intended solely for splitting firewood away from power equipment. See our guide on how to use a splitting wedge for firewood splitting techniques.
What is an electric tree felling wedge?
An electric tree felling wedge is a motorized, battery-powered mechanical spindle wedge used primarily by commercial foresters to lift heavy leaning timber without swinging a sledgehammer. For rural property owners and firewood cutters, manual high-impact ABS and reinforced nylon wedges driven with an axe poll or mallet remain the standard, dependable, and portable choice.
Related guides
Explore our chainsaw gear hub for more field accessories, or check our chainsaw safety gear checklist before heading into the woodlot. For protective apparel, see the best chainsaw chaps and best chainsaw gloves. If you are processing felled logs into stove lengths, read how to buck firewood safely with a chainsaw and compare the best chainsaws for firewood. For manual felling tools, compare top chopping axes in our best felling axe review. When working at the splitting block, see how to use a splitting wedge and our roundup of the best splitting wedges. You can also read what is a felling axe, check the chainsaw chaps size chart, find the best chainsaw helmet for small heads, learn how often should you sharpen a chainsaw chain, diagnose why does my chainsaw cut crooked, determine how long should a chainsaw bar be, and learn what size chainsaw do i need for firewood.
