40cc vs 50cc Chainsaw: Which One Should You Buy? (2026)

Cutting season is here and the woodpile is waiting. The 40cc vs 50cc chainsaw question comes down to how much wood you cut and how big it is: a 40cc saw handles limbing, pruning and small firewood, while a 50cc saw steps up to felling small trees and bucking larger logs with less strain. The four saws below, all gas-powered, show what the listings actually offer: one sits in the 50cc class, and the other three are a step above it in displacement and power.

FirewoodGearHQ may earn a small commission if you buy through links on this page. The price you pay stays the same. Read our affiliate disclosure.

40cc vs 50cc chainsaw: the quick answer

A 40cc chainsaw suits light work: pruning, limbing, cutting small firewood and storm cleanup where the wood is modest. A 50cc chainsaw suits heavier firewood duty: felling small to medium trees, bucking logs for the woodpile and working through a full cord without the saw feeling overmatched. The listings here do not include a 40cc saw; the Husqvarna 450 Rancher at 50.2cc is the only 50cc-class saw, and the other three are 58cc and 62cc saws that sit above the 50cc class in displacement. If your work is mostly small wood, the 50cc class is the sweet spot; if you regularly cut larger logs, the step up in displacement buys cutting speed.

The four saws, ranked

Ranked by how directly each listing serves the 40cc vs 50cc question and the completeness of its stated specs:

1. Husqvarna 450 Rancher

The only 50cc-class saw here: the listing titles it as a 50.2-cc, 3.2-HP gas chainsaw with a 20 inch bar, weighing 11.3 pounds. The spec table lists “Engine CC” as 40.9, which contradicts the 50.2-cc in the title; per the listing title and bullets, this is a 50.2-cc saw. It lists Smart Start for easier starting, an inertia-activated chain brake, Air Injection centrifugal air cleaning and LowVib anti-vibration, with a stated 2-year manufacturer warranty. The listing recommends bar lengths from 13 inches to 20 inches. For the 40cc vs 50cc question, this is the 50cc answer.

2. VEVOR 62CC 3.8HP

The most powerful saw here: a 62cc, 3.8-HP gas chainsaw with a 20 inch bar, weighing 16.5 pounds. The listing claims a maximum speed of 12000 RPM, a throttle-synced choke for easier starting, and a 20 inch bar that cuts logs up to 17.9 inches in a single pass. It lists a guard plate and switch to reduce accidental activation. No warranty term is stated. This is a step above the 50cc class in both displacement and power.

3. NEO-TEC 62CC

A 62cc, 3.5-HP gas chainsaw, the heaviest here at 22 pounds. The listing offers a choice of 20 or 22 inch guide bars and claims a maximum speed of 7500 RPM. It lists a dual-tank system with 550ml fuel and 260ml oil capacity, a 25:1 fuel-oil mix ratio, an anti-vibration system and a side-mounted chain tensioner. The package includes the saw, both 20-inch and 22-inch bars with chains, engine oil, bar oil, a mixing container, gloves and a tool kit. No warranty term is stated.

4. VEVOR 58CC 3.22HP

A 58cc, 3.22-HP gas chainsaw with a 20 inch bar, weighing 15.4 pounds. The listing claims a 2.4KW/8500 RPM engine speed with a maximum of 12000 RPM, a cutting diameter of 17.91 inches, a 0.58 qt/550ml fuel tank and a 0.27 qt/260ml chain oil tank, plus a built-in shock absorber. No warranty term is stated. The 58cc displacement sits between the 50cc class and the 62cc saws above.

What the displacement means for firewood

Displacement sets the ceiling on what a saw cuts comfortably. The 50.2-cc Husqvarna is listed for tree pruning, yard cleanups and firewood cutting, which matches the 50cc class role: enough power for regular firewood without the weight of a larger saw. The 58cc and 62cc saws list higher horsepower figures (3.22, 3.5 and 3.8 HP against the Husqvarna’s 3.2 HP) and the listings frame them for felling, land clearing and cutting thick hardwoods. If your firewood comes from small trees and storm limbs, the 50cc class does the work; if you fell and buck larger trees, the extra displacement shortens the job.

Weight and handling

The listings state weights from 11.3 pounds for the Husqvarna to 22 pounds for the NEO-TEC, with the two VEVOR saws at 15.4 and 16.5 pounds. Weight matters on a long cutting day: the lightest saw here is nearly half the weight of the heaviest. The Husqvarna lists LowVib anti-vibration and an ergonomic handle; the VEVOR 58CC lists a built-in shock absorber; the NEO-TEC lists an anti-vibration system with a non-slip handle. If you cut for hours, the lighter 50cc-class saw tires you less; if you cut in short bursts, the heavier saws’ extra power may matter more than their weight.

Bar length and what you cut

All four listings center on 20 inch bars: the Husqvarna, both VEVOR saws and the NEO-TEC all list 20 inches, with the NEO-TEC also offering a 22 inch option. The Husqvarna listing recommends bar lengths between 13 inches and 20 inches. The VEVOR 62CC listing states its 20 inch bar cuts logs up to 17.9 inches; the VEVOR 58CC listing states a cutting diameter of 17.91 inches. For firewood, a 20 inch bar bucks most logs you will stack; the bar length matters less than the displacement for choosing between the 40cc and 50cc classes.

Frequently Asked Questions

Is a 40cc or 50cc chainsaw better for firewood?

For regular firewood cutting, the 50cc class is the more capable choice: it fells small trees and bucks logs with less strain than a 40cc saw. A 40cc saw suits limbing, pruning and cutting small wood. The listings here include one 50cc-class saw (the Husqvarna 450 Rancher at 50.2cc) and three larger saws (58cc and 62cc); no 40cc saw is listed.

What does the 50.2-cc vs 40.9-cc contradiction mean?

The Husqvarna listing titles the saw as 50.2-cc but its spec table lists “Engine CC” as 40.9. The title and bullets describe a 50.2-cc, 3.2-HP saw, so the 50.2-cc figure is the one the listing leads with. When a listing contradicts itself, the title and bullets are the safer guide.

How much heavier are the larger saws?

Per the listings: the Husqvarna 50.2-cc saw weighs 11.3 pounds, the VEVOR 58cc weighs 15.4 pounds, the VEVOR 62cc weighs 16.5 pounds and the NEO-TEC 62cc weighs 22 pounds. The step from the 50cc class to the 62cc saws adds weight; the listed weights run from the lightest to the heaviest as stated above.

Do any of these listings state a warranty?

Only the Husqvarna: a stated 2-year manufacturer warranty. The VEVOR and NEO-TEC listings state no warranty term.

What safety gear do I need with a chainsaw?

The listings mention chain brakes and anti-vibration, but safe chainsaw work needs more: chainsaw chaps, a helmet with face screen and hearing protection, gloves and boots. Never cut alone, and watch for kickback on every cut.

Related guides

See chainsaw chaps vs chainsaw jacket for PPE, and Echo vs Husqvarna chainsaw for brand comparisons. Also see best chainsaw tachometer for tuning.