Best 18 Inch Chainsaw Chain Under $25 (2026): 5 Picks
Five 18 in chainsaw chains under $25 compared: pack sizes from 2 to 5, stated steels and cutter treatments, low-kickback claims and the models each listing says they fit.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Top pickFONLOYEN 5-pack chain9.6/10View on Amazon - 2
Runner-upRAINHOL 4-pack chain9.6/10View on Amazon - 3
5-pack valueZIYIZE 5-pack chain9.4/10View on Amazon - 4
2-pack pickLoggers Art Gens 2-pack9.5/10View on Amazon - 5
Husqvarna S83G 18 Chainsaw chainView on Amazon - 6
4 Pack 16 Inch Chainsaw Chain 3/8" LP Pitch .050'' Gauge 56View on Amazon - 74 Pack 16 Inch Chainsaw Chain 3/8" LP Pitch .043'' Gauge 56View on Amazon
- 8
KAKEI 12 Inch Chainsaw Chain fits Stihl 1/4" LP Pitch .043"View on Amazon - 9
KAKEI 18 Inch Chainsaw Chain 3/8" LP Pitch .050" Gauge 62View on Amazon
Fall cutting season is here and the saw is chewing instead of slicing, which means the chain is done. The fix is a fresh loop, and the best 18 inch chainsaw chain under 25 is a straightforward pick: five chains here all share the same 3/8 in LP pitch, .050 in gauge and 62 drive links, so the choice comes down to pack size, stated steel and low-kickback claims.
FirewoodGearHQ may earn a small commission if you buy through links on this page. The price you pay stays the same. Affiliate disclosure.
Quick picks
- Top pick FONLOYEN 5-pack chain: Low-kickback 5-pack with hardened rivets and a chrome outer layer. Check price on Amazon
- Runner-up RAINHOL 4-pack chain: 65 manganese steel 4-pack with low-kickback cutters, each chain sealed. Check price on Amazon
- 5-pack value ZIYIZE 5-pack chain: Chrome-plated full-chisel 5-pack, pre-sharpened out of the box. Check price on Amazon
- 2-pack pick Loggers Art Gens 2-pack: Low-kickback 2-pack with a wide stated fit list. Check price on Amazon
The picks
5Pack 18 Inch Chainsaw Chain 3/8" LP Pitch .050"
A 5-pack of 18 in chainsaw chains, 3/8 in LP pitch, .050 in gauge, 62 drive links, with stated low-kickback and low-vibration design, hardened rivets and a chrome outer layer.
Pros
- Low-kickback, low-vibration design stated, meeting kickback performance requirements
- All saw chain rivets hardened and quenched, per the listing
- Tough chrome outer layer to reduce wear and chain adjustments
- 5-pack gives the most spare chains here
Cons
- No warranty term stated
- No stated steel grade behind the durability claims
- Fit list is broad; the listing still asks you to confirm your parameters
- No stated country of manufacture or cutter material grade
RAINHOL 18"Chainsaw Chain 3/8" LP .050" Gauge 62
A 4-pack of 18 in chainsaw chains, 3/8 in LP pitch, .050 in gauge, 62 drive links, in 65 manganese steel with chrome-plated cutters, heat-treated rivets and low-kickback design, each chain individually sealed.
Pros
- 65 manganese steel stated, the only named steel grade here
- Low-kickback design with reduced vibration stated
- Chrome-plated cutters and heat-treated rivets
- Each chain individually sealed for storage
Cons
- No warranty term stated
- 4-pack holds one fewer chain than the 5-packs
- No stated kickback performance standard behind the low-kickback claim
- 'Included Components' lists 'Compartments Included', which reads like a listing error
2 Pack 18 Inch Chainsaw Chain 3/8" LP Pitch
A 2-pack of 18 in chainsaw chains, 3/8 in LP pitch, .050 in gauge, 62 drive links, with stated low kickback and a lubrication system, in quenched steel.
Pros
- Low kickback stated in the title
- Lubrication system stated for the chain
- High-temperature quenching for wear resistance stated
- Wide fit list: Echo, Ego, Poulan, Greenworks, Homelite, Craftsman, Husqvarna, Remington, Ryobi
Cons
- No warranty term stated
- Spec table lists 16 in for item and chain length against an 18 in title
- 2-pack is the smallest pack here
- No stated steel grade or rivet treatment
5Pack 18 Inch Chainsaw Chain 3/8" LP Pitch .050"
A 5-pack of 18 in chainsaw chains, 3/8 in LP pitch, .050 in gauge, 62 drive links, with chrome-plated cutters and hardened rivets, pre-sharpened.
Pros
- 5-pack gives the most spare chains here
- Chrome-plated cutters with hardened rivets stated
- Pre-sharpened and ready out of the box, per the listing
- Anti-clog design stated to prevent dust buildup
Cons
- No low-kickback claim; spec table says full chisel chain type
- Bullets mention a '16 Inch Chain Design' against an 18 in title
- Bullets say 0.50 in gauge against the .050 in title (likely a typo)
- No warranty term stated
UNCO- Chainsaw Chain, 18 Inch, 3 Pack
A 3-pack of 18 in chainsaw chains, 3/8 in LP pitch, .050 in gauge, 62 drive links, in high-strength manganese steel with precision-engineered cutters.
Pros
- High-strength manganese steel stated
- Precision-engineered cutters with secure tie straps stated
- S62-compatible spec stated for the 62 drive links
- 3-pack suits frequent users, per the listing
Cons
- No low-kickback claim stated
- No warranty term stated
- 3-pack holds fewer chains than the 4 and 5-packs
- No stated rivet or cutter surface treatment
More options to compare
Husqvarna S83G 18 Chainsaw chainCheck price on Amazon
4 Pack 16 Inch Chainsaw Chain 3/8" LP Pitch .050'' Gauge 56Check price on Amazon- 4 Pack 16 Inch Chainsaw Chain 3/8" LP Pitch .043'' Gauge 56Check price on Amazon
KAKEI 12 Inch Chainsaw Chain fits Stihl 1/4" LP Pitch .043"Check price on Amazon
KAKEI 18 Inch Chainsaw Chain 3/8" LP Pitch .050" Gauge 62Check price on Amazon
Best 18 inch chainsaw chain under 25: compare the picks
| Model | Woodlot Score | Pack | Chain spec (stated) | Low-kickback (stated) |
|---|---|---|---|---|
| FONLOYEN 5-pack chain | 9.6/10 | 5 chains | 18 in, 3/8 in LP, .050 in, 62 DL | Yes |
| RAINHOL 4-pack chain | 9.6/10 | 4 chains | 18 in, 3/8 in LP, .050 in, 62 DL | Yes |
| Loggers Art Gens 2-pack | 9.5/10 | 2 chains | 18 in, 3/8 in LP, .050 in, 62 DL | Yes |
| ZIYIZE 5-pack chain | 9.4/10 | 5 chains | 18 in, 3/8 in LP, .050 in, 62 DL | Not stated |
| UNCO 3-pack chain | 9.4/10 | 3 chains | 18 in, 3/8 in LP, .050 in, 62 DL | Not stated |
Specifications are manufacturer rated, collected 20 October 2026. All five chains are 18 in, 3/8 in LP pitch, .050 in gauge, 62 drive links, so they fit the same bars; what differs is pack size, stated materials and safety claims.
How we scored them
Each chain is scored out of 10 on performance, build, value, safety and warranty, using only what the listing publishes. A chain whose listing states low-kickback design earns safety points; none of these listings states a warranty term, so warranty scores are zero across the board. The weights are on our How We Pick page.
| Product | Woodlot Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| FONLOYEN 5-pack chain | 9.6 | 29 | 21 | 22 | 7 | 0 |
| RAINHOL 4-pack chain | 9.6 | 29 | 21 | 21 | 7 | 0 |
| Loggers Art Gens 2-pack | 9.5 | 28 | 19 | 19 | 5 | 0 |
| ZIYIZE 5-pack chain | 9.4 | 27 | 19 | 22 | 0 | 0 |
| UNCO 3-pack chain | 9.4 | 28 | 20 | 20 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
Buying guide: 18 in chainsaw chains
Pitch, gauge and drive links
These three numbers are the whole fit question. Every chain here states 3/8 in low-profile pitch, .050 in gauge and 62 drive links. If your bar stamp or owner’s manual lists those three, any of these five loops fits; if it lists anything else, none of them do. Several listings say exactly this: confirm your parameters before buying.
Pack size and the season ahead
Chains are consumables, and the packs here run from 2 to 5 loops. A 5-pack covers a heavy cutting season with spares to spare; a 2-pack suits the burner who cuts a little each fall and sharpens between swaps. All five state the same 18 in, 3/8 in LP, .050 in, 62-link spec, so pack size is about how much wood you cut, not about fit.
Low-kickback claims
Three of these listings state low-kickback design: FONLOYEN, RAINHOL and Loggers Art Gens, with FONLOYEN adding that its chain meets kickback performance requirements. Kickback is the main chainsaw hazard, so a stated low-kickback chain is worth weighing alongside steel and pack size. The ZIYIZE listing states a full-chisel chain type with no low-kickback claim, and the UNCO listing makes no kickback claim either.
Steel, rivets and cutters
Listings describe their metal in their own words: 65 manganese steel (RAINHOL), high-strength manganese steel (UNCO), hardened and quenched rivets with a chrome outer layer (FONLOYEN), chrome-plated cutters with heat-treated rivets (RAINHOL), and high-temperature quenching (Loggers Art Gens). Take these as the maker’s claims; none of the listings publishes evidence behind them.
Bar oil and chain life
A chain is only as good as its lubrication. Every loop here benefits from a steady supply of bar and chain oil while cutting; a dry chain stretches and dulls fast no matter what steel the listing claims. See the bar and chain oil picks.
Matching the chain to your saw
All five listings say the same thing in different words: confirm the pitch, gauge, bar length and drive-link count before you buy. ZIYIZE points you to the owner’s manual or the guide bar side stamp, Loggers Art Gens warns that not all bars take the same amount of links, and FONLOYEN and RAINHOL both say to check the manual or the bar stamp, with customer support offered on model compatibility. The fit lists differ in detail: Loggers Art Gens names the most models, from Homelite and Craftsman to Husqvarna 136 and 137, Echo CS-346 and CS-370, Greenworks 20242 and 20332, Ego CS1800 and CS1804, and Ryobi RY3818. A wide fit list is convenient, but the stamp on your own bar is the final word.
Steel and coatings, as stated
Only one listing names its steel: RAINHOL states 65 manganese steel with chrome-plated cutters and heat-treated rivets, and each chain comes individually sealed for storage. UNCO states high-strength manganese steel with precision-engineered cutters and secure tie straps. ZIYIZE states chrome-plated cutters, hardened rivets and an anti-clog design, pre-sharpened out of the box. FONLOYEN states a chrome outer layer with hardened and quenched rivets. Loggers Art Gens states high-temperature quenching for wear resistance and resistance to elongation, but no steel grade. Treat the coatings as the stated difference: where two chains match on spec, the chrome and quenching claims are what you are comparing.
Sharpen or swap
A sharp chain throws chips; a dull one makes dust and works the saw harder. Touch up cutters with a file or a sharpener between swaps, and rotate through your spares so no single loop does all the work. See the best chainsaw sharpener picks. Match the pitch, gauge and drive-link count to your bar before buying.
Wear cut-resistant chaps, a helmet with face screen and hearing protection, gloves and sturdy boots. Know where the kickback zone is (the upper tip of the bar), keep the chain brake working and the chain sharp, and never cut alone in the woods. Felling trees is hazardous work: hire a professional for large, leaning or storm-damaged trees, especially near buildings or power lines. See OSHA logging safety for chain saw operators. Read our Safety Disclaimer.
Around the Woodpile
- Match the chain to the bar: 3/8 in LP pitch, .050 in gauge, 62 drive links on all five picks here.
- Confirm fit before you buy: several listings ask you to check the owner’s manual or the guide bar side stamp for pitch, gauge and drive link count.
- Store spares sealed and oiled: the RAINHOL chains arrive individually sealed, which is the model for all of them.
- Keep a sharp spare on hand: with 2 to 5 chains per pack, swapping a dull loop beats forcing it.
- Run the chain the maker describes: low-kickback design helps, but chaps, helmet, gloves and boots still apply every time the saw runs.
Frequently Asked Questions
What do 3/8 LP, .050 and 62DL mean?
3/8 in LP is the chain pitch, the spacing between drive links; .050 in is the gauge, the thickness of the drive link that rides in the bar groove; 62DL is the drive link count, the number of links in the loop. All three must match your bar.
Will an 18 in chain fit my chainsaw?
Only if your bar takes an 18 in loop with 3/8 in LP pitch, .050 in gauge and 62 drive links. Check the owner’s manual or the stamp on the guide bar, as several of these listings advise.
What is a low-kickback chain?
A chain designed to reduce the kickback reaction when the bar nose contacts wood. Three picks here state low-kickback design: FONLOYEN, RAINHOL and Loggers Art Gens.
How many chains should I keep on hand?
At least one sharp spare, so a dull chain costs you a swap instead of a cutting day. These packs hold 2 to 5 chains, which covers a season for most home firewood cutting.
Related guides
See the best 18 inch chainsaw chain roundup without the price cap, the best chainsaw sharpener picks, and bar and chain oil. For dirty or frozen wood, see the best chainsaw chain for dirty wood.
