6ft vs 8ft Firewood Rack: Which One Should You Buy?

FirewoodGearHQ may earn a small commission if you buy through links on this page. The price you pay stays the same. Read our affiliate disclosure.

Below: the quick answer, what each size holds, how to measure your space, the steel and warranty behind both picks, the two racks ranked, and answers to the questions wood burners ask before buying.

The quick answer

The 8ft Woodhaven rack holds 1/2 cord; the 6ft Woodhaven rack holds 1/3 cord plus, based on 24 in log splits. If you heat with wood all winter, the 8ft rack keeps more of the season within arm’s reach of the door. If you burn weekends and holidays, the 6ft rack holds plenty and fits where an 8ft rack will not. Both are raised for airflow, both are Made in the USA from heavy-duty steel, and both carry a lifetime structural warranty.

6ft vs 8ft firewood rack: how to choose

Start with the woodpile, not the rack. A 6ft rack holds 1/3 cord plus; an 8ft rack holds 1/2 cord. If your winter burn is a cord or more, the 8ft rack covers a bigger share of it in one fill, which means fewer restacking sessions in the cold. If you buy wood by the half cord or burn a fire pit and an occasional stove fire, the 6ft rack is the right size and leaves room in the yard for everything else.

Then measure the spot. An 8ft rack needs a straight 8ft run of reasonably level ground, plus room to walk around the ends with an armload of splits. A 6ft rack fits a shorter fence line, a porch wall or the side of a shed. Both racks here are raised off the ground for airflow, which also keeps the bottom row out of the mud; the 6ft listing’s spec table even suggests ordering double for soft surfaces, a hint worth heeding on lawn or dirt.

What each size holds

The 6ft Woodhaven listing states 1/3 cord plus, based on 24 in long log splits. The 8ft Woodhaven title states 1/2 cord. Those figures assume full-length stacking with splits cut to the stated length; shorter splits leave gaps, and longer splits overhang. Either way, the 8ft rack holds roughly half again as much as the 6ft rack, which is the whole point of the longer size: fewer fills per season.

Space, steel and warranty

Both racks are Made in the USA from heavy-duty steel; the 6ft listing states 16-gauge U.S. steel square tubing with precision-drilled holes and stainless steel nuts and bolts. Both are elevated for airflow so the pile dries from below as well as the sides. Both carry a lifetime structural warranty, stated in both titles. The 6ft listing states assembly in 30 minutes with no special tools needed. One listing wrinkle: the 8ft rack’s bullets describe a 6-foot rack with a cover, plainly copied from its smaller sibling; the title says 8-foot, 1/2 cord, without a cover, and the title is what we follow.

Gear: the two racks, ranked

Two racks, one maker, ranked by capacity. Both carry the same lifetime structural warranty and the same raised-steel construction.

1. Woodhaven 8-foot raised firewood rack

The big one: an 8-foot raised rack in black, stated to hold 1/2 cord, without a cover. Made in the USA from heavy-duty steel with a lifetime structural warranty, elevated for airflow. For the household that heats with wood, this is the one-fill-per-storm option.

Note the listing wrinkle: the bullets describe a 6-foot rack with a cover and 1/3 cord capacity, which contradicts the 8-foot, 1/2 cord, no-cover title. The title is the authority here; treat the bullets as a copy-paste slip from the smaller rack. If a cover matters to you, confirm with the seller before ordering, since the title says this one ships without one.

2. Woodhaven 6-ft raised firewood rack with cover

The compact one: a 6-foot raised rack in brown, stated to hold 1/3 cord plus based on 24 in log splits, with a cover included. Made in the USA from 16-gauge steel with stainless hardware, a lifetime structural warranty, and assembly stated at 30 minutes with no special tools. The cover measures 72L by 22W by 12H in and keeps the top rows dry while the exposed sides keep seasoning. For weekend burners and tight yards, this is the right size.

Frequently Asked Questions

How much wood does a 6ft rack hold?

The 6ft Woodhaven listing states 1/3 cord plus, based on 24 in long log splits. That assumes the splits are cut to that length and stacked full; shorter splits leave gaps and hold less. For a weekend burner, a third of a cord is a comfortable working pile.

How much wood does an 8ft rack hold?

The 8ft Woodhaven title states 1/2 cord. That is roughly half again the 6ft rack’s capacity, which means fewer refills across the heating season. If you heat with wood full time, the 8ft rack earns its footprint.

Should I cover my firewood rack?

Cover the top, leave the sides open. Both listings describe the same idea: the cover keeps the top wood dry while the exposed wood keeps seasoning with airflow. The 6ft rack ships with a cover; the 8ft title says it ships without one. The 6ft listing describes its cover as keeping the top rows dry while allowing airflow; a tarp pulled tight over the whole pile does not breathe the same way.

Why should the rack be raised off the ground?

Both racks are elevated for airflow, which lets the pile dry from below and keeps the bottom row out of the mud. Wood stacked straight on soil wicks moisture and rots from the bottom. The 6ft listing’s spec table even suggests ordering double for soft surfaces.

How long does assembly take?

The 6ft Woodhaven listing states 30 minutes with no special tools needed, using precision-drilled holes and stainless steel nuts and bolts. No assembly time is stated for the 8ft rack, but the construction is the same raised-steel design.

Related guides

See our 4ft vs 6ft firewood rack and half cord vs full cord firewood rack comparisons, plus the best firewood rack for one cord, indoor vs outdoor firewood rack and aluminum vs steel firewood rack guides.